Product Name
BMPR2/Bmpr Ii, Polyclonal Antibody
Full Product Name
Anti-BMPR2/Bmpr Ii Picoband antibody
Product Synonym Names
Bone morphogenetic protein receptor type-2; BMP type-2 receptor; BMPR-2; Bone morphogenetic protein receptor type II; BMP type II receptor; BMPR-II; BMPR2; PPH1
Product Gene Name
anti-BMPR2 antibody
[Similar Products]
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
3D Structure
ModBase 3D Structure for Q13873
Species Reactivity
Human, Mouse, Rat
No cross reactivity with other proteins.
Immunogen
E Coli-derived human BMPR2 recombinant protein (Position: R455-K512).
Subcellular Localization
Cell membrane.
Tissue Specificity
Highly expressed in heart and liver.
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Contents
Each vial contains 4mg Trehalose, 0.9mg NaCl, 0.2mg Na2HPO4, 0.05mg NaN3.
Preparation and Storage
Store at -20 degree C for one year. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for a longer time. Avoid repeated freezing and thawing.
ISO Certification
Manufactured in an ISO 13485:2003 and EN ISO 13485:2012 Certified Laboratory.
Other Notes
Small volumes of anti-BMPR2 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Related Product Information for
anti-BMPR2 antibody
Description: Bone morphogenetic protein receptor type II or BMPR2 is a serine/threonine receptor kinase. This gene encodes a member of the bone morphogenetic protein (BMP) receptor family of transmembrane serine/threonine kinases. The ligands of this receptor are BMPs, which are members of the TGF-beta superfamily. BMPs are involved in endochondral bone formation and embryogenesis. These proteins transduce their signals through the formation of heteromeric complexes of two different types of serine (threonine) kinase receptors: type I receptors of about 50-55 kD and type II receptors of about 70-80 kD. Type II receptors bind ligands in the absence of type I receptors, but they require their respective type I receptors for signaling, whereas type I receptors require their respective type II receptors for ligand binding. Mutations in this gene have been associated with primary pulmonary hypertension, both familial and fenfluramine-associated, and with pulmonary venoocclusive disease.
Protein Function: On ligand binding, forms a receptor complex consisting of two type II and two type I transmembrane serine/threonine kinases. Type II receptors phosphorylate and activate type I receptors which autophosphorylate, then bind and activate SMAD transcriptional regulators. Binds to BMP7, BMP2 and, less efficiently, BMP4. Binding is weak but enhanced by the presence of type I receptors for BMPs. Mediates induction of adipogenesis by GDF6.
Applications Tested/Suitable for anti-BMPR2 antibody
ELISA (EIA), Western Blot (WB)
Application Notes for anti-BMPR2 antibody
WB: 0.1-0.5mug/ml
Direct ELISA: 0.1-0.5mug/ml
Western Blot (WB) of anti-BMPR2 antibody
Figure 1. Western blot analysis of BMPR2 using anti-BMPR2 antibody (MBS1750371).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: rat brain tissue lysate,
Lane 2: mouse brain tissue lysate.
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-BMPR2 antigen affinity purified polyclonal antibody at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for BMPR2 at approximately 130KD. The expected band size for BMPR2 is at 115KD.

NCBI/Uniprot data below describe general gene information for BMPR2. It may not necessarily be applicable to this product.
NCBI Accession #
NP_001195.2
[Other Products]
NCBI GenBank Nucleotide #
NM_001204.6
[Other Products]
UniProt Primary Accession #
Q13873
[Other Products]
UniProt Secondary Accession #
Q13161; Q16569; Q4ZG08; Q53SA5; Q585T8[Other Products]
UniProt Related Accession #
Q13873[Other Products]
Molecular Weight
59,963 Da
NCBI Official Full Name
bone morphogenetic protein receptor type-2
NCBI Official Synonym Full Names
bone morphogenetic protein receptor type 2
NCBI Official Symbol
BMPR2??[Similar Products]
NCBI Official Synonym Symbols
BMR2; PPH1; BMPR3; BRK-3; POVD1; T-ALK; BMPR-II
??[Similar Products]
NCBI Protein Information
bone morphogenetic protein receptor type-2
UniProt Protein Name
Bone morphogenetic protein receptor type-2
UniProt Synonym Protein Names
Bone morphogenetic protein receptor type II; BMP type II receptor; BMPR-II
Protein Family
Bone morphogenetic protein receptor
UniProt Gene Name
BMPR2??[Similar Products]
UniProt Synonym Gene Names
PPH1; BMP type-2 receptor; BMPR-2; BMP type II receptor; BMPR-II??[Similar Products]
NCBI Summary for BMPR2
This gene encodes a member of the bone morphogenetic protein (BMP) receptor family of transmembrane serine/threonine kinases. The ligands of this receptor are BMPs, which are members of the TGF-beta superfamily. BMPs are involved in endochondral bone formation and embryogenesis. These proteins transduce their signals through the formation of heteromeric complexes of two different types of serine (threonine) kinase receptors: type I receptors of about 50-55 kD and type II receptors of about 70-80 kD. Type II receptors bind ligands in the absence of type I receptors, but they require their respective type I receptors for signaling, whereas type I receptors require their respective type II receptors for ligand binding. Mutations in this gene have been associated with primary pulmonary hypertension, both familial and fenfluramine-associated, and with pulmonary venoocclusive disease. [provided by RefSeq, Jul 2008]
UniProt Comments for BMPR2
On ligand binding, forms a receptor complex consisting of two type II and two type I transmembrane serine/threonine kinases. Type II receptors phosphorylate and activate type I receptors which autophosphorylate, then bind and activate SMAD transcriptional regulators. Binds to BMP7, BMP2 and, less efficiently, BMP4. Binding is weak but enhanced by the presence of type I receptors for BMPs. Mediates induction of adipogenesis by GDF6.
Research Articles on BMPR2
1. Studying the methylation pattern of the BMPR2 promoter region in pulmonary arterial hypertension patients and controls revealed a a CpG island, suitable for methylation, in the BMPR2 promoter region, in addition to NIT-2, sex-determining region Y, and heat shock factor transcription factor s.No evidence of methylation was detected in this region in patients and controls.
Precautions
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
Disclaimer
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.
It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.